UART Log for Maxis TP-Link Archer C5v
4G Dongle plug-in after boot, see #1439
Created
September 23, 2020 19:29
-
-
Save Anime4000/4dd729dc405a9e3897eec36121184992 to your computer and use it in GitHub Desktop.
TP-Link Archer C5v UART Log
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.09.24 03:18:58 =~=~=~=~=~=~=~=~=~=~=~= | |
| BGA IC | |
| Xtal:1 | |
| DDR3 init. | |
| DRAMC init done. | |
| Calculate size. | |
| DRAM size=128MB | |
| Set new TRFC. | |
| ddr-1066 | |
| 7512DRAMC V1.1.2 (0) | |
| EN751221 at Mon Dec 3 10:03:07 UTC 2018 version 1.1 free bootbase | |
| Memory size 128MB | |
| flash base: bc000000 | |
| Found SPI Flash 16MiB GD25Q128B at 0xbc000000 | |
| tclinux partition size = 0xf90000, real size = 0x7f94c1f2 | |
| tclinux partition size < its real size | |
| Press any key in 1 secs to enter boot command mode. | |
| ............ | |
| Invalid Power GPIO, just return and don't turn on Power LED | |
| the tag fsLen is 0x96bbdf, fsAddr is 0x200000, kernelLen is 0x155735, kernelAddr is 0x200 | |
| ==> startAddr = 0x80006530 | |
| Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80780000 | |
| 75xx: 0x0 | |
| Uncompressing [LZMA] ... done. | |
| ==> jumpAddr = 0x80006530 | |
| Linux version 2.6.36 (root@9025424db348) (gcc version 4.3.6 (Buildroot 2012.05) ) #74 SMP Mon Jan 20 03:40:16 UTC 2020 | |
| ISPRAM0: PA=00330000,Size=00010000,enabled | |
| flash_init: flash_base:bc000000 | |
| flash_init: flash_base:bc000000 | |
| memsize:128MB | |
| EcoNet EN751221 SOC prom init | |
| bootconsole [early0] enabled | |
| CPU revision is: 00019558 (MIPS 34Kc) | |
| Determined physical RAM map: | |
| memory: 07fe0000 @ 00020000 (usable) | |
| Wasting 1024 bytes for tracking 32 unused pages | |
| Zone PFN ranges: | |
| Normal 0x00000020 -> 0x00008000 | |
| Movable zone start PFN for each node | |
| early_node_map[1] active PFN ranges | |
| 0: 0x00000020 -> 0x00008000 | |
| 3 available secondary CPU TC(s) | |
| PERCPU: Embedded 7 pages/cpu @81103000 s7264 r8192 d13216 u65536 | |
| pcpu-alloc: s7264 r8192 d13216 u65536 alloc=16*4096 | |
| pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32480 | |
| Kernel command line: es=1 | |
| PID hash table entries: 512 (order: -1, 2048 bytes) | |
| Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
| Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
| Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. | |
| Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | |
| Writing ErrCtl register=00010058 | |
| Readback ErrCtl register=00010058 | |
| nmi base is 8115c200 | |
| Memory: 125304k/130944k available (3288k kernel code, 5640k reserved, 667k data, 204k init, 0k highmem) | |
| SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| Hierarchical RCU implementation. | |
| RCU-based detection of stalled CPUs is disabled. | |
| Verbose stalled-CPUs detection is disabled. | |
| NR_IRQS:64 | |
| CPU frequency 900.00 MHz | |
| Using 199.968 MHz high precision timer. | |
| console [ttyS0] enabled, bootconsole disabled | |
| console [ttyS0] enabled, bootconsole disabled | |
| Calibrating delay loop... 598.01 BogoMIPS (lpj=2990080) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 512 | |
| 34K sync es set to 1. | |
| Config7: 0x80080500 | |
| Limit of 4 TCs set | |
| TLB of 64 entry pairs shared by 2 VPEs | |
| VPE 0: TC 0 1 2, VPE 1: TC 3 | |
| IPI buffer pool of 16 buffers | |
| CPU revision is: 00019558 ((null)) | |
| TC 1 going on-line as CPU 1 | |
| CPU revision is: 00019558 ((null)) | |
| TC 2 going on-line as CPU 2 | |
| CPU revision is: 00019558 ((null)) | |
| TC 3 going on-line as CPU 3 | |
| Brought up 4 CPUs | |
| kworker/u:0 used greatest stack depth: 14864 bytes left | |
| NET: Registered protocol family 16 | |
| MT7512_pcie_init | |
| check pcie link up status: | |
| isRC0_LINKUP=1 | |
| isRC1_LINKUP=1 | |
| registering PCI controller with io_map_base unset | |
| bio: create slab <bio-0> at 0 | |
| pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] | |
| pci 0000:00:01.0: BAR 8: assigned [mem 0x20100000-0x202fffff] | |
| pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] | |
| pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x20000000-0x200fffff] | |
| pci 0000:00:00.0: PCI bridge to [bus 01-01] | |
| pci 0000:00:00.0: bridge window [io disabled] | |
| pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff] | |
| pci 0000:00:00.0: bridge window [mem pref disabled] | |
| pci 0000:02:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff 64bit] | |
| pci 0000:02:00.0: BAR 0: set to [mem 0x20100000-0x201fffff 64bit] (PCI address [0x20100000-0x201fffff] | |
| pci 0000:02:00.0: BAR 6: assigned [mem 0x20200000-0x2020ffff pref] | |
| pci 0000:00:01.0: PCI bridge to [bus 02-02] | |
| pci 0000:00:01.0: bridge window [io disabled] | |
| pci 0000:00:01.0: bridge window [mem 0x20100000-0x202fffff] | |
| pci 0000:00:01.0: bridge window [mem pref disabled] | |
| PCI: Enabling device 0000:00:00.0 (0000 -> 0002) | |
| PCI: Enabling device 0000:00:01.0 (0000 -> 0002) | |
| NET: Registered protocol family 8 | |
| NET: Registered protocol family 20 | |
| Switching to clocksource MIPS | |
| NET: Registered protocol family 2 | |
| IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| TCP established hash table entries: 4096 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 4096 (order: 3, 32768 bytes) | |
| TCP: Hash tables configured (established 4096 bind 4096) | |
| TCP reno registered | |
| UDP hash table entries: 128 (order: 0, 4096 bytes) | |
| UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) | |
| NET: Registered protocol family 1 | |
| mt7512_pcie_fixup: 0x1438 = 20000014 | |
| mt7512_pcie_fixup: 0x3438 = 20100015 | |
| mt7512_pcie_rc1_retrain: 70 = 0047dc11 80 = 01608c12 | |
| TC3162 hardware watchdog module loaded. | |
| squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| fuse init (API version 7.15) | |
| msgmni has been set to 244 | |
| io scheduler noop registered (default) | |
| ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162 | |
| brd: module loaded | |
| Register flash device:flash0 | |
| SPI Flash Init Start | |
| SPI Flash Init Finish | |
| IS_SPIFLASH=0x2, IS_NANDFLASH=0x0, (0xBFA10114)=0x0) | |
| [linux_spi_nand_flash_init] spi nor flash | |
| tc3162: flash device 0x01000000 at 0x1c000000 | |
| tc3162: Found SPIFLASH 16MiB GD25Q128B | |
| Creating 7 MTD partitions on "tc3162": | |
| 0x000000000000-0x000000020000 : "boot" | |
| 0x000000020000-0x000000220000 : "kernel" | |
| 0x000000220000-0x000000fc0000 : "rootfs" | |
| 0x000000fc0000-0x000000fd0000 : "config2" | |
| 0x000000fd0000-0x000000fe0000 : "romfile" | |
| 0x000000fe0000-0x000000ff0000 : "config" | |
| 0x000000ff0000-0x000001000000 : "radio" | |
| rootfs | |
| PPP generic driver version 2.4.2 | |
| PPP Deflate Compression module registered | |
| PPP BSD Compression module registered | |
| NET: Registered protocol family 24 | |
| RT3xxx EHCI/OHCI init. | |
| TP-LINK Kernel Monitor Initializing... | |
| Mirror/redirect action on | |
| u32 classifier | |
| Actions configured | |
| Netfilter messages via NETLINK v0.30. | |
| nf_conntrack version 0.5.0 (1957 buckets, 51200 max) | |
| ctnetlink v0.93: registering with nfnetlink. | |
| ip_tables: (C) 2000-2006 Netfilter Core Team | |
| TCP cubic registered | |
| Initializing XFRM netlink socket | |
| NET: Registered protocol family 10 | |
| ip6_tables: (C) 2000-2006 Netfilter Core Team | |
| IPv6 over IPv4 tunneling driver | |
| NET: Registered protocol family 17 | |
| NET: Registered protocol family 15 | |
| Bridge firewalling registered | |
| Ebtables v2.0 registered | |
| 802.1Q VLAN Support v1.8 Ben Greear <[email protected]> | |
| All bugs added by David S. Miller <[email protected]> | |
| VFS: Mounted root (squashfs filesystem) readonly on device 31:2. | |
| Freeing unused kernel memory: 204k freed | |
| starting pid 278, tty '': '/etc/init.d/rcS' | |
| mount used greatest stack depth: 14832 bytes left | |
| mkdir used greatest stack depth: 14576 bytes left | |
| cp used greatest stack depth: 14312 bytes left | |
| SCSI subsystem initialized | |
| insmod used greatest stack depth: 14264 bytes left | |
| hotplug used greatest stack depth: 14032 bytes left | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| BGA USB PHY config | |
| port 0 u2_slew_rate_calibration | |
| FM_OUT value = 157(0x0000009D) | |
| SR calibration value = 4 | |
| port 1 u2_slew_rate_calibration | |
| FM_OUT value = 150(0x00000096) | |
| SR calibration value = 4 | |
| USB driver version: 751221.2.20160516 | |
| xhc_mtk xhc_mtk: xHCI Host Controller | |
| xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 1 | |
| xhc_mtk xhc_mtk: irq 18, io mem 0x1fb90000 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 2 ports detected | |
| xhc_mtk xhc_mtk: xHCI Host Controller | |
| xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 2 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| insmod used greatest stack depth: 13932 bytes left | |
| Initializing USB Mass Storage driver... | |
| usbcore: registered new interface driver usb-storage | |
| USB Mass Storage support registered. | |
| module_sel: module license 'unspecified' taints kernel. | |
| Disabling lock debugging due to kernel taint | |
| tcsmux version: tcsmux V1.1.0.0 (Nov 26 2018-12:01:42). | |
| vlantag_drv_init | |
| TC3162 LED Manager 0.1 init | |
| tcledctrl version: tcledctrl V1.1.0.0 (Jan 20 2020-03:40:54). | |
| [0xff0000]:0x9275 | |
| [0xff8000]:0x6276 | |
| tccicmd V1.1.0.0 (Jan 20 2020-03:40:57) | |
| ERROR!Create /etc/fwTCver.conf fail! | |
| macType = 0 | |
| qdma_lan: physical_size is 0x00200000 | |
| ether.c:v1.00-NAPI 29.Mar.2015 | |
| eth0: FE MAC Ethernet address: D8:0D:17:BB:20:5A | |
| init eth_vlan proc. | |
| init eth_forward proc. | |
| User External switch ,type 10 | |
| Disable forward! | |
| tcPhyVerLookUp 3785 9451 | |
| 7512 Ge, | |
| [tcPhyInit] in [tcPhyInit] out , r31 = (12, 0x0) | |
| GE Rext AnaCal Done! (1)(0x1f) | |
| GE Rext AnaCal Done! (1)(0x1f) | |
| GE R50 AnaCal Done! (1) (0x21)(0xa1) | |
| GE R50 AnaCal Done! (1) (0x24)(0xa4) | |
| GE R50 AnaCal Done! (1) (0x24)(0xa4) | |
| GE R50 AnaCal Done! (1) (0x24)(0xa4) | |
| GE Tx offset AnaCal Done! (3)(0x23) | |
| GE Tx offset AnaCal Done! (2)(0x2) | |
| GE Tx offset AnaCal Done! (2)(0x22) | |
| GE Tx offset AnaCal Done! (1)(0x1) | |
| GE Tx amp AnaCal Done! (21) (0xb) | |
| GE Tx amp AnaCal Done! (12) (0x14) | |
| GE Tx amp AnaCal Done! (15) (0x11) | |
| GE Tx amp AnaCal Done! (16) (0x10) | |
| tcPhyVerLookUp 3785 9412 | |
| 7512 Fe, | |
| , port_num = 65528, ephy_addr = 0, ephy_addr_base = 0x8 | |
| [tcPhyInit] in [tcPhyInit] out , r31 = (0, 0x0) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-0 R50 wait! (1) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-0 R50 wait! (2) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-0 R50 wait! (3) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (248)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-0 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-0 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-0 Tx amp AnaCal wait! (1) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (248)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-0 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-0 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-0 Tx amp AnaCal wait! (2) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (248)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-0 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-0 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-0 Tx amp AnaCal wait! (3) | |
| tcPhyVerLookUp 3785 9412 | |
| 7512 Fe, | |
| , port_num = 65529, ephy_addr = 1, ephy_addr_base = 0x8 | |
| [tcPhyInit] in [tcPhyInit] out , r31 = (1, 0x0) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-1 R50 wait! (1) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-1 R50 wait! (2) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-1 R50 wait! (3) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (249)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-1 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-1 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-1 Tx amp AnaCal wait! (1) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (249)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-1 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-1 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-1 Tx amp AnaCal wait! (2) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (249)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-1 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-1 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-1 Tx amp AnaCal wait! (3) | |
| tcPhyVerLookUp 3785 9412 | |
| 7512 Fe, | |
| , port_num = 65530, ephy_addr = 2, ephy_addr_base = 0x8 | |
| [tcPhyInit] in [tcPhyInit] out , r31 = (2, 0x0) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-2 R50 wait! (1) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-2 R50 wait! (2) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-2 R50 wait! (3) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (250)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-2 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-2 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-2 Tx amp AnaCal wait! (1) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (250)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-2 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-2 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-2 Tx amp AnaCal wait! (2) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (250)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-2 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-2 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-2 Tx amp AnaCal wait! (3) | |
| tcPhyVerLookUp 3785 9412 | |
| 7512 Fe, | |
| , port_num = 65531, ephy_addr = 3, ephy_addr_base = 0x8 | |
| [tcPhyInit] in [tcPhyInit] out , r31 = (3, 0x0) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-3 R50 wait! (1) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-3 R50 wait! (2) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-3 R50 wait! (3) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (251)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-3 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-3 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-3 Tx amp AnaCal wait! (1) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (251)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-3 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-3 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-3 Tx amp AnaCal wait! (2) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (251)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-3 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-3 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-3 Tx amp AnaCal wait! (3) | |
| tcPhyVerLookUp 3785 9412 | |
| 7512 Fe, | |
| , port_num = 65532, ephy_addr = 4, ephy_addr_base = 0x8 | |
| [tcPhyInit] in [tcPhyInit] out , r31 = (4, 0x0) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-4 R50 wait! (1) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-4 R50 wait! (2) | |
| FE R50 AnaCal ERROR! (init) | |
| FE R50 AnaCal zcal_ctrl (32) | |
| FE-4 R50 wait! (3) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (252)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-4 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-4 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-4 Tx amp AnaCal wait! (1) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (252)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-4 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-4 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-4 Tx amp AnaCal wait! (2) | |
| FE Tx amp AnaCal ERROR! (init) | |
| FE Tx amp (252)(1)(0) === | |
| (0)(0)(0)(ce00)(0)(ce00) | |
| (0)(0)(0)(0)(0) | |
| FE-4 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-4 Tx amp AnaCal Saturation! (0)(0x0) | |
| FE-4 Tx amp AnaCal wait! (3) | |
| tcPhyVerLookUp 3785 0 | |
| tcPhyVerLookUp 3785 0 | |
| tcPhyVerLookUp 3785 0 | |
| tcPhyVerLookUp 3785 0 | |
| tcPhyVerLookUp 3785 0 | |
| tcPhyVerLookUp 3785 0 | |
| tcPhyVerLookUp 3785 0 | |
| tcPhyVerLookUp 3785 9451 | |
| 7512 Ge, | |
| , port_num = 4, ephy_addr = 12, ephy_addr_base = 0x8 | |
| [tcPhyInit] in [tcPhyInit] out , r31 = (12, 0x0) | |
| Dying Gasp 0.31 init | |
| oenmap 0 oenmap2 0 | |
| Exec. Successful | |
| Exec. Successful | |
| Exec. Successful | |
| macType = 0 | |
| qdma_wan: qdma_bmgr.c [2646]: HW_FWD physical size is not illegal, force setting to 4MB | |
| qdma_wan: physical_size is 0x00400000 | |
| Exec. Successful | |
| Exec. Successful | |
| Exec. Successful | |
| eth0: starting interface. | |
| netif_start_queue | |
| mount used greatest stack depth: 13784 bytes left | |
| L2TP core driver, V2.0 | |
| PPPoL2TP kernel driver, V2.0 | |
| PPTP driver version 0.8.5 | |
| MTK DSP support | |
| /etc/init.d/rcS: line 123: cmmsyslogd: not found | |
| [1] PCM V2.4 (Oct 17 2017 15:58:58) | |
| Major Num:255, device: spi | |
| init mod-slic3,interface:ZSI,devNum:1,gpio:2000 | |
| ZSI | |
| init slicFunc slic1:7 slic2:7 | |
| SPI_Reset | |
| SLIC_DeviceVerify | |
| le9662_deviceVerify Start | |
| devInfo->deviceNum=0 res_arr[0]=8 res_arr[0]=75 | |
| le9662_deviceVerify Success! | |
| rd_cnt=1 | |
| SLIC_SELF_TEST VP886_R_OPCOND_RD = 0x0 | |
| SLIC_SELF_TEST WRT VAL = 0x47 | |
| SLIC_SELF_TEST RD BACK = 0x47 | |
| SLIC WRT RD test Pass | |
| SLIC_SELF_TEST WRT VAL = 0x0 | |
| SLIC_SELF_TEST RD BACK = 0x0 | |
| SLIC WRT RD test Pass | |
| DEVICE_VERIFY ret:1 | |
| le9662_deviceVerify already! Bypass 2nd verify! | |
| DEVICE_VERIFY ret:0 | |
| pcm1 ch num:2 pcm2 ch num:0 | |
| Init fxsNum(2) + fxoNum(0) = slic_ch_num(:2) , deviceNum(1) | |
| [DBG SLIC_Init:L613]FXS_NUM=2 FXO_NUM=0 | |
| le9662_deviceInit 0 | |
| le9662_slicParamReset Successful(CountryCode=Default) | |
| device profile len:48 | |
| 0C FF 00 2C 05 14 46 82 | |
| 44 46 5E 14 00 F6 95 00 | |
| 94 30 94 30 E4 04 A0 00 | |
| E6 60 22 20 00 FF 21 30 | |
| 14 30 14 30 14 19 3C FF | |
| 95 00 2D 6E 02 3C 02 FD | |
| dc profile len:15 | |
| 0C 01 00 0B 02 03 C6 91 | |
| E5 1C 86 58 80 00 07 | |
| ring profile len:22 | |
| 0C 04 00 12 01 0C C0 08 | |
| 00 00 00 44 3A 9D 00 00 | |
| 00 00 AA 02 4E 00 | |
| ac profile len:80 | |
| A4 00 F4 4C 01 49 CA F5 | |
| 98 AA 7B AB 2C A3 25 A5 | |
| 24 B2 3D 9A 2A AA A6 9F | |
| 01 8A 1D 01 A3 A0 2E B2 | |
| B2 BA AC A2 A6 CB 3B 45 | |
| 88 2A 20 3C BC 4E A6 2B | |
| A5 2B 3E BA 8F 82 A8 71 | |
| 80 A9 F0 50 00 86 2A 42 | |
| A1 CB 1B A3 A8 FB 87 AA | |
| FB 9F A9 F0 96 2E 01 00 | |
| le9662 Init .Calibration completed on both lines | |
| le9662_Init_Cnt = 97 | |
| CODEC_LINEAR setting | |
| FXS-0 timeslot:2 | |
| FXS-1 timeslot:3 | |
| fxs0 gain--TX :4000 RX: 4000 | |
| fxs1 gain--TX :4000 RX: 4000 | |
| [DBG SLIC_Init:L613]FXS_NUM=2 FXO_NUM=0 | |
| Bypass le9662_deviceInit on Device 1! | |
| init mod-ksocket | |
| init mod-acodec | |
| init mod-foip3 | |
| =============================== | |
| || MTK DSP init successfully || | |
| =============================== | |
| dbgTool_init init v2.0 | |
| pid 410's current affinity mask: (null) | |
| pid 410's new affinity mask: 8 | |
| pid 405's current affinity mask: (null) | |
| pid 405's new affinity mask: 8 | |
| pid 420's current affinity mask: (null) | |
| pid 420's new affinity mask: 8 | |
| pid 418's current affinity mask: (null) | |
| pid 418's new affinity mask: 8 | |
| pid 419's current affinity mask: (null) | |
| pid 419's new affinity mask: 8 | |
| pid 403's current affinity mask: (null) | |
| pid 403's new affinity mask: 8 | |
| Power Manager 0.2 init | |
| ifconfig: SIOCSIFADDR: No such device | |
| Please press Enter to activate this console. iptables used greatest stack depth: 13760 bytes left | |
| [ dm_readFile ] 2061: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml | |
| [ initKernelMonitorFd ] 433: *kmFd=7 | |
| [ initKernelMonitorFd ] 457: registered fd 7 with kernel monitor | |
| InternetAccessDetect: can't load library 'libxdslctl.so' | |
| HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSzie:80B, foeNum:16384 | |
| IP check use Black List | |
| insmod used greatest stack depth: 13704 bytes left | |
| sendto /var/tmp/7 msg 2001 error No such file or directory ,pid 438 | |
| [ oal_sys_getOldTZInfo ] 553: Open TZ file error! | |
| ioctl: No such device | |
| use br_hw_addr! | |
| ioctl: No such device | |
| ioctl: No such device | |
| ------------[ cut here ]------------ | |
| WARNING: at fs/proc/generic.c:589 proc_register+0x218/0x300() | |
| proc_dir_entry 'tc3162/igmp_hwnat' already registered | |
| Modules linked in: hw_nat(P) ipt_webWarn_target(P) pwm(P) pcmDump(P) ovdsp foip(P) acodec_x(P) ortp ksocket(P) fxs3(P) slic3(P) spi(P) lec(P) pcm1(P) DSPCore(P) sys_mod pptp l2tp_ppp l2tp_core ipt_STAT nf_conntrack_pptp nf_conntrack_proto_gre qdma_wan(P) speedtest(P) dying_gasp(P) eth_ephy(P) eth(P) qdma_lan(P) fe_core(P) tccicmd(P) tcledctrl(P) tcvlantag tcsmux module_sel(P) usb_storage xhci_hcd usbcore sd_mod scsi_wait_scan scsi_mod | |
| Call Trace: | |
| [<8000be64>] dump_stack+0x8/0x34 | |
| [<80046430>] warn_slowpath_common+0x78/0xa4 | |
| [<800464e4>] warn_slowpath_fmt+0x2c/0x38 | |
| [<8010871c>] proc_register+0x218/0x300 | |
| [<80108914>] create_proc_entry+0x58/0xa0 | |
| [<80309374>] igmp_hwnat_init+0x6c/0x9c | |
| [<8030169c>] br_add_bridge+0x100/0x1a8 | |
| [<803022dc>] br_ioctl_deviceless_stub+0x240/0x2a8 | |
| [<801ee1b0>] sock_ioctl+0x104/0x354 | |
| [<800c85f0>] do_vfs_ioctl+0xa4/0x704 | |
| [<800c8ca0>] sys_ioctl+0x50/0xb0 | |
| [<80004450>] stack_done+0x20/0x40 | |
| ---[ end trace c5a321329dae05d6 ]--- | |
| use br_hw_addr! | |
| device eth0.5 entered promiscuous mode | |
| device eth0 entered promiscuous mode | |
| br0: port 1(eth0.5) entering forwarding state | |
| br0: port 1(eth0.5) entering forwarding state | |
| device eth0.4 entered promiscuous mode | |
| br0: port 2(eth0.4) entering forwarding state | |
| br0: port 2(eth0.4) entering forwarding state | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Address already in use | |
| igmpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Address device eth0.3 entered promiscuous mode | |
| abr0: port 3(eth0.3) entering forwarding state | |
| br0: port 3(eth0.3) entering forwarding state | |
| lready in use | |
| igmpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 90; error = Address already in use | |
| igmpd# Err: setsockopt - MRT_ADD_VIF | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Adevice eth0.2 entered promiscuous mode | |
| dbr0: port 4(eth0.2) entering forwarding state | |
| br0: port 4(eth0.2) entering forwarding state | |
| dress already in use | |
| igmpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Address already in use | |
| igmpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 90; error = Address already in use | |
| igmpd# Err: setsockopt - MRT_ADD_VIF | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Address already in use | |
| igmpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Address already in use | |
| igmpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 90; error = Address already in use | |
| igmpd# Err: setsockopt - MRT_ADD_VIF | |
| done | |
| done | |
| ra0 iwpriv used greatest stack depth: 13032 bytes left | |
| no private ioctls. | |
| register mt_drv | |
| PCI: Enabling device 0000:01:00.0 (0000 -> 0002) | |
| === pAd = c1e82000, size = 911664 === | |
| <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x | |
| <-- RTMPAllocAdapterBlock, Status=0 | |
| pAd->CSRBaseAddress =0xc1d80000, csr_addr=0xc1d80000! | |
| device_id =0x7603 | |
| RtmpChipOpsHook(507): Not support for HIF_MT yet! | |
| mt7603_init()--> | |
| mt_bcn_buf_init(224): Not support for HIF_MT yet! | |
| <--mt7603_init() | |
| OAL:Writefile 2.4GHz, WscConfigMethods:0x80 | |
| ifconfig: ioctl 0x8913 failed: No such device | |
| ifconfig: ioctl 0x8913 failed: No such device | |
| ifconfig: ioctl 0x8913 failed: No such device | |
| ifconfig: ioctl 0x8913 failed: No such device | |
| TX_BCN DESC a51b8000 size = 320 | |
| RX[0] DESC a51ba000 size = 2048 | |
| RX[1] DESC a51bb000 size = 2048 | |
| !!!!!!!!! pCountryRegion is set to 1 | |
| !!!!!!!!! pCountryRegion is set to 0 | |
| cfg_mode=9 | |
| cfg_mode=9 | |
| wmode_band_equal(): Band Equal! | |
| Key1Str is Invalid key length(0) or Type(0) | |
| Key1Str is Invalid key length(0) or Type(0) | |
| Key1Str is Invalid key length(0) or Type(0) | |
| Key1Str is Invalid key length(0) or Type(0) | |
| Key2Str is Invalid key length(0) or Type(0) | |
| Key2Str is Invalid key length(0) or Type(0) | |
| Key2Str is Invalid key length(0) or Type(0) | |
| Key2Str is Invalid key length(0) or Type(0) | |
| Key3Str is Invalid key length(0) or Type(0) | |
| Key3Str is Invalid key length(0) or Type(0) | |
| Key3Str is Invalid key length(0) or Type(0) | |
| Key3Str is Invalid key length(0) or Type(0) | |
| Key4Str is Invalid key length(0) or Type(0) | |
| Key4Str is Invalid key length(0) or Type(0) | |
| Key4Str is Invalid key length(0) or Type(0) | |
| Key4Str is Invalid key length(0) or Type(0) | |
| APCli_WPAPSK_KEY, key string required 8 ~ 64 characters!!! | |
| I/F(apcli0) Key1Str is Invalid key length! | |
| I/F(apcli0) Key2Str is Invalid key length! | |
| I/F(apcli0) Key3Str is Invalid key length! | |
| I/F(apcli0) Key4Str is Invalid key length! | |
| Smart Carrier Sense = 0 | |
| FW Version:ap_pcie | |
| FW Build Date:20160107100755 | |
| CmdAddressLenReq:(ret = 0) | |
| CmdFwStartReq: override = 1, address = 1048576 | |
| CmdStartDLRsp: WiFI FW Download Success | |
| AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) | |
| efuse_probe: efuse = 10000002 | |
| RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 | |
| RtmpEepromGetDefault::e2p_dafault=1 | |
| RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1 | |
| NVM is FLASH mode, flash_offset = 0xff0000 | |
| 1. Phy Mode = 14 | |
| exec! | |
| ==============eeFlashId: 30098 ==================== | |
| @@@ NICReadEEPROMParameters : pAd->FWLoad=0 | |
| now bb MainSsid mac d8:0d:17:bb:20:5a | |
| Country Region from e2p = ffff | |
| tssi_1_target_pwr_g_band = 34 | |
| 2. Phy Mode = 14 | |
| 3. Phy Mode = 14 | |
| NICInitPwrPinCfg(14): Not support for HIF_MT yet! | |
| NICInitializeAsic(584): Not support rtmp_mac_sys_reset () for HIF_MT yet! | |
| mt_mac_init()--> | |
| mt7603_init_mac_cr()--> | |
| AsicSetMacMaxLen(1821): Set the Max RxPktLen=1024! | |
| <--mt_mac_init() | |
| WTBL Segment 1 info: | |
| MemBaseAddr/FID:0x28000/0 | |
| EntrySize/Cnt:32/128 | |
| WTBL Segment 2 info: | |
| MemBaseAddr/FID:0x40000/0 | |
| EntrySize/Cnt:64/128 | |
| WTBL Segment 3 info: | |
| MemBaseAddr/FID:0x42000/64 | |
| EntrySize/Cnt:64/128 | |
| WTBL Segment 4 info: | |
| MemBaseAddr/FID:0x44000/128 | |
| EntrySize/Cnt:32/128 | |
| MtAsicACQueue: Write CR:21510, Value=10421 | |
| MtAsicACQueue: Write CR:21500, Value=10421 | |
| AntCfgInit(2571): Not support for HIF_MT yet! | |
| RTMPSetPhyMode(): channel out of range, use first ch=0 | |
| MCS Set = ff ff 00 00 01 | |
| [BuildAcsScanChList] Support channel: PrimCh=1, CentCh=255, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=2, CentCh=0, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=3, CentCh=1, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=4, CentCh=2, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=5, CentCh=3, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=6, CentCh=4, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=7, CentCh=5, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=8, CentCh=6, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=9, CentCh=7, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=10, CentCh=8, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=11, CentCh=9, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=12, CentCh=10, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=13, CentCh=11, DFS=0, skip 0 | |
| ===================================================== | |
| Channel 1 : Busy Time = 18363, Score 82,Skip Channel = FALSE | |
| Channel 2 : Busy Time = 21002, Score 79,Skip Channel = FALSE | |
| Channel 3 : Busy Time = 21412, Score 79,Skip Channel = FALSE | |
| Channel 4 : Busy Time = 21717, Score 79,Skip Channel = FALSE | |
| Channel 5 : Busy Time = 22206, Score 78,Skip Channel = FALSE | |
| Channel 6 : Busy Time = 21140, Score 79,Skip Channel = FALSE | |
| Channel 7 : Busy Time = 21179, Score 79,Skip Channel = FALSE | |
| Channel 8 : Busy Time = 15560, Score 85,Skip Channel = FALSE | |
| Channel 9 : Busy Time = 12354, Score 88,Skip Channel = FALSE | |
| Channel 10 : Busy Time = 12439, Score 88,Skip Channel = FALSE | |
| Channel 11 : Busy Time = 921, Score 100,Skip Channel = FALSE | |
| Channel 12 : Busy Time = 12233, Score 88,Skip Channel = TRUE | |
| Channel 13 : Busy Time = 12290, Score 88,Skip Channel = TRUE | |
| ===================================================== | |
| [GroupChListInsert] Insert Grp Ch Idx=0,CenChannel=255,CtrlCh=1,BusyTime=19284,SkipGrp=0 | |
| [GroupChListInsert] Insert Grp Ch Idx=1,CenChannel=0,CtrlCh=2,BusyTime=40286,SkipGrp=0 | |
| [GroupChListInsert] Insert Grp Ch Idx=2,CenChannel=1,CtrlCh=3,BusyTime=40696,SkipGrp=0 | |
| [GroupChListInsert] Insert Grp Ch Idx=3,CenChannel=2,CtrlCh=4,BusyTime=41001,SkipGrp=0 | |
| [GroupChListInsert] Insert Grp Ch Idx=4,CenChannel=3,CtrlCh=5,BusyTime=41490,SkipGrp=0 | |
| [GroupChListInsert] Insert Grp Ch Idx=5,CenChannel=4,CtrlCh=6,BusyTime=22061,SkipGrp=0 | |
| [GroupChListInsert] Insert Grp Ch Idx=6,CenChannel=5,CtrlCh=7,BusyTime=43240,SkipGrp=0 | |
| [GroupChListInsert] Insert Grp Ch Idx=7,CenChannel=6,CtrlCh=8,BusyTime=37621,SkipGrp=0 | |
| [GroupChListInsert] Insert Grp Ch Idx=8,CenChannel=7,CtrlCh=9,BusyTime=34415,SkipGrp=0 | |
| [GroupChListInsert] Insert Grp Ch Idx=9,CenChannel=8,CtrlCh=10,BusyTime=34500,SkipGrp=0 | |
| [GroupChListInsert] Insert Grp Ch Idx=10,CenChannel=9,CtrlCh=11,BusyTime=1842,SkipGrp=0 | |
| [GroupChListInsert] Insert Grp Ch Idx=11,CenChannel=10,CtrlCh=12,BusyTime=14075,SkipGrp=1 | |
| [GroupChListInsert] Insert Grp Ch Idx=12,CenChannel=11,CtrlCh=13,BusyTime=14132,SkipGrp=1 | |
| Group Idx=0,control-Channle=1,cen-channel=255,Max-Busy-Time=19284 | |
| Group Idx=1,control-Channle=2,cen-channel=0,Max-Busy-Time=40286 | |
| Group Idx=2,control-Channle=3,cen-channel=1,Max-Busy-Time=40696 | |
| Group Idx=3,control-Channle=4,cen-channel=2,Max-Busy-Time=41001 | |
| Group Idx=4,control-Channle=5,cen-channel=3,Max-Busy-Time=41490 | |
| Group Idx=5,control-Channle=6,cen-channel=4,Max-Busy-Time=22061 | |
| Group Idx=6,control-Channle=7,cen-channel=5,Max-Busy-Time=43240 | |
| Group Idx=7,control-Channle=8,cen-channel=6,Max-Busy-Time=37621 | |
| Group Idx=8,control-Channle=9,cen-channel=7,Max-Busy-Time=34415 | |
| Group Idx=9,control-Channle=10,cen-channel=8,Max-Busy-Time=34500 | |
| Group Idx=10,control-Channle=11,cen-channel=9,Max-Busy-Time=1842 | |
| Min Busy Time=1842,select best ch 11 | |
| SYNC - BBP R4 to 20MHz.l | |
| SYNC - BBP R4 to 20MHz.l | |
| SYNC - BBP R4 to 20MHz.l | |
| SYNC - BBP R4 to 20MHz.l | |
| SYNC - BBP R4 to 20MHz.l | |
| SYNC - BBP R4 to 20MHz.l | |
| SYNC - BBP R4 to 20MHz.l | |
| SYNC - BBP R4 to 20MHz.l | |
| SYNC - BBP R4 to 20MHz.l | |
| SYNC - BBP R4 to 20MHz.l | |
| AsicSetRalinkBurstMode(4138): Not support for HIF_MT yet! | |
| RTMPSetPiggyBack(876): Not support for HIF_MT yet! | |
| AsicSetTxPreamble(4125): Not support for HIF_MT yet! | |
| AsicAddSharedKeyEntry(1987): Not support for HIF_MT yet! | |
| AsicAddSharedKeyEntry(1987): Not support for HIF_MT yet! | |
| AsicAddSharedKeyEntry(1987): Not support for HIF_MT yet! | |
| AsicAddSharedKeyEntry(1987): Not support for HIF_MT yet! | |
| The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8 | |
| AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 | |
| Main bssid = d8:0d:17:bb:20:5a | |
| <==== rt28xx_init, Status=0 | |
| @@@ ed_monitor_init : ===> | |
| @@@ ed_monitor_init : <=== | |
| mt7603_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7c87d0f, EDCCA_Status=1 | |
| jiffies=ffff9aa5, POLLING_MODE_DETECT_INTV=300 | |
| WiFi Startup Cost (ra0): 7.310s | |
| ifconfig used greatest stack depth: 12208 bytes left | |
| Set_ed_chk_proc()::ed_chk=0 | |
| mt7603_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0xd7083f0f, EDCCA_Status=0 | |
| device ra0 entered promiscuous mode | |
| br0: port 5(ra0) entering forwarding state | |
| br0: port 5(ra0) entering forwarding state | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Address already in use | |
| igmpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Address already in use | |
| igmpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 90; error = Address already in use | |
| igmpd# Err: setsockopt - MRT_ADD_VIF | |
| device apcli0 entered promiscuous mode | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Address already in use | |
| igdevice ra1 entered promiscuous mode | |
| mpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Address already in use | |
| igmpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 90; error = Address alreaddevice ra2 entered promiscuous mode | |
| y in use | |
| igmpd# Err: setsockopt - MRT_ADD_VIF | |
| device ra3 entered promiscuous mode | |
| Set_ed_chk_proc()::ed_chk=0 | |
| mt7603_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0xd7083f0f, EDCCA_Status=0 | |
| WLAN-Start wlNetlinkTool | |
| Waiting for Wireless Events from interfaces... | |
| swWlanChkAhbErr: netlink to do | |
| rai0 no private ioctls. | |
| The remaining IMEM space cannot accommodate section .imem_text !! | |
| Remaining IMEM space: 732 bytes Section Size: 888 bytes | |
| register rtpci | |
| PCI: Enabling device 0000:02:00.0 (0000 -> 0002) | |
| === pAd = c2682000, size = 1541984 === | |
| <-- RTMPAllocTxRxRingMemory, Status=0 | |
| <-- RTMPAllocAdapterBlock, Status=0 | |
| pAd->CSRBaseAddress =0xc2580000, csr_addr=0xc2580000! | |
| device_id =0x7662 | |
| ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a | |
| get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai | |
| iptables: Chain already exists. | |
| Chain EB_FORWARD_GUEST already exists. | |
| OAL:Writefile 5GHz, WscConfigMethods:0x80 | |
| ifconfig: ioctl 0x8913 failed: No such device | |
| ifconfig: ioctl 0x8913 failed: No such device | |
| ifconfig: ioctl 0x8913 failed: No such device | |
| ifconfig: ioctl 0x8913 failed: No such device | |
| build time = | |
| 20141115060606a | |
| rom patch for E3 IC | |
| platform = | |
| ALPS | |
| hw/sw version = | |
| ŠŠ | |
| patch version = | |
| FW Version:0.0.00 Build:1 | |
| Build Time:201607111443____ | |
| fw for E3 IC | |
| ==============eeFlashId: 30306 ==================== | |
| RX[0] DESC a40ca000 size = 8192 | |
| RX[1] DESC a40cc000 size = 8192 | |
| UserCfgInit(): MgmtRingFullTimes(0) init | |
| proc_watch_dog_5G_init(): can create /proc/tplink/watch_dog_check_5G | |
| proc_5G_alive_init(): can create /proc/tplink/wireless_5G_alive | |
| cfg_mode=14 | |
| cfg_mode=14 | |
| wmode_band_equal(): Band Not Equal! | |
| APSDCapable[0]=1 | |
| APSDCapable[1]=1 | |
| APSDCapable[2]=1 | |
| APSDCapable[3]=1 | |
| APSDCapable[4]=1 | |
| APSDCapable[5]=1 | |
| APSDCapable[6]=1 | |
| APSDCapable[7]=1 | |
| APSDCapable[8]=1 | |
| APSDCapable[9]=1 | |
| APSDCapable[10]=1 | |
| APSDCapable[11]=1 | |
| APSDCapable[12]=1 | |
| APSDCapable[13]=1 | |
| APSDCapable[14]=1 | |
| APSDCapable[15]=1 | |
| default ApCliAPSDCapable[0]=1 | |
| Key1Str is Invalid key length(0) or Type(0) | |
| Key1Str is Invalid key length(0) or Type(0) | |
| Key1Str is Invalid key length(0) or Type(0) | |
| Key1Str is Invalid key length(0) or Type(0) | |
| Key2Str is Invalid key length(0) or Type(0) | |
| Key2Str is Invalid key length(0) or Type(0) | |
| Key2Str is Invalid key length(0) or Type(0) | |
| Key2Str is Invalid key length(0) or Type(0) | |
| Key3Str is Invalid key length(0) or Type(0) | |
| Key3Str is Invalid key length(0) or Type(0) | |
| Key3Str is Invalid key length(0) or Type(0) | |
| Key3Str is Invalid key length(0) or Type(0) | |
| Key4Str is Invalid key length(0) or Type(0) | |
| Key4Str is Invalid key length(0) or Type(0) | |
| Key4Str is Invalid key length(0) or Type(0) | |
| Key4Str is Invalid key length(0) or Type(0) | |
| APCli_WPAPSK_KEY, key string required 8 ~ 64 characters!!! | |
| I/F(apcli0) Key1Str is Invalid key length! | |
| I/F(apcli0) Key2Str is Invalid key length! | |
| I/F(apcli0) Key3Str is Invalid key length! | |
| I/F(apcli0) Key4Str is Invalid key length! | |
| RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 | |
| NVM is FLASH mode (pAd->flash_offset = 0xff8000) | |
| 1. Phy Mode = 49 | |
| ==============eeFlashId: 30306 ==================== | |
| get_chl_grp:illegal channel (167) | |
| get_chl_grp:illegal channel (167) | |
| get_chl_grp:illegal channel (169) | |
| get_chl_grp:illegal channel (169) | |
| get_chl_grp:illegal channel (171) | |
| get_chl_grp:illegal channel (171) | |
| /opt/bba/git-src/maxis/20200120/BBA1_0_Maxis_C5v/mtk/modules/private/wifi/MT7612E_LinuxAP_3.0.4.0.P1_DPA/os/linux/../../chips/mt76x2.c:2910 assert (ad->TxPower[choffset].Channel == 42)failed | |
| Country Region from e2p = ffff | |
| mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=1, temp_tx_alc_enable=1 | |
| mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=1 | |
| mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=14, low_temp_slope=9 | |
| mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0 | |
| mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4 | |
| mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0 | |
| mt76x2_get_external_lna_gain::LNA type=0x1, BLNAGain=0xffffff8c, ALNAGain0=0xffffff8c, ALNAGain1=0xffffff8c, ALNAGain2=0xffffff8c | |
| 2. Phy Mode = 49 | |
| 3. Phy Mode = 49 | |
| andes_pci_fw_init | |
| 0x1300 = 00073200 | |
| AntCfgInit: primary/secondary ant 0/1 | |
| andes_load_cr:cr_type(2) | |
| ChipStructAssign(): MT76x2 hook ! | |
| RTMPSetPhyMode: channel is out of range, use first channel=0 | |
| MCS Set = ff ff 00 00 01 | |
| [BuildAcsScanChList] Support channel: PrimCh=36, CentCh=42, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=40, CentCh=42, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=44, CentCh=42, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=48, CentCh=42, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=52, CentCh=58, DFS=1, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=56, CentCh=58, DFS=1, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=60, CentCh=58, DFS=1, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=64, CentCh=58, DFS=1, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=149, CentCh=155, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=153, CentCh=155, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=157, CentCh=155, DFS=0, skip 0 | |
| [BuildAcsScanChList] Support channel: PrimCh=161, CentCh=155, DFS=0, skip 0 | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| get_low_mid_hi_index:illegal channel(0) | |
| get_low_mid_hi_index:illegal channel(0) | |
| mt76x2_single_sku::sku_base_pwr = 0x1e, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffd(-3), 0x13B4: 0x1b0f043d | |
| GenerateGroupChannelList ChannelListNum=12 | |
| ===================================================== | |
| Channel 36 : Busy Time = 45, Score 100,Skip Channel = FALSE | |
| ===================================================== | |
| Channel 40 : Busy Time = 1, Score 100,Skip Channel = FALSE | |
| ===================================================== | |
| Channel 44 : Busy Time = 3, Score 100,Skip Channel = FALSE | |
| ===================================================== | |
| Channel 48 : Busy Time = 13, Score 100,Skip Channel = FALSE | |
| ===================================================== | |
| Channel 52 : Busy Time = 291, Score 100,Skip Channel = TRUE | |
| ===================================================== | |
| Channel 56 : Busy Time = 1257, Score 99,Skip Channel = TRUE | |
| ===================================================== | |
| Channel 60 : Busy Time = 1285, Score 99,Skip Channel = TRUE | |
| ===================================================== | |
| Channel 64 : Busy Time = 2524, Score 98,Skip Channel = TRUE | |
| ===================================================== | |
| Channel 149 : Busy Time = 2871, Score 98,Skip Channel = FALSE | |
| ===================================================== | |
| Channel 153 : Busy Time = 3457, Score 97,Skip Channel = FALSE | |
| ===================================================== | |
| Channel 157 : Busy Time = 3625, Score 97,Skip Channel = FALSE | |
| ===================================================== | |
| Channel 161 : Busy Time = 3534, Score 97,Skip Channel = FALSE | |
| ===================================================== | |
| GroupChListInsert Insert new group channel list Number=1 CenChannel=42 BestCtrlChannel=36 BUSY_TIEM=45, SkipGroup=0, GrpScore=100 | |
| GroupChListUpdate Update group channel list index=1 CenChannel=42 BestCtrlChannel=36 BUSY_TIEM=45 SkipGroup=0, GrpScore=100 | |
| GroupChListUpdate Update group channel list index=1 CenChannel=42 BestCtrlChannel=36 BUSY_TIEM=45 SkipGroup=0, GrpScore=100 | |
| GroupChListUpdate Update group channel list index=1 CenChannel=42 BestCtrlChannel=36 BUSY_TIEM=45 SkipGroup=0, GrpScore=100 | |
| GroupChListInsert Insert new group channel list Number=2 CenChannel=58 BestCtrlChannel=52 BUSY_TIEM=291, SkipGroup=1, GrpScore=100 | |
| GroupChListUpdate Update group channel list index=2 CenChannel=58 BestCtrlChannel=52 BUSY_TIEM=1257 SkipGroup=1, GrpScore=99 | |
| GroupChListUpdate Update group channel list index=2 CenChannel=58 BestCtrlChannel=52 BUSY_TIEM=1285 SkipGroup=1, GrpScore=99 | |
| GroupChListUpdate Update group channel list index=2 CenChannel=58 BestCtrlChannel=52 BUSY_TIEM=2524 SkipGroup=1, GrpScore=98 | |
| GroupChListInsert Insert new group channel list Number=3 CenChannel=155 BestCtrlChannel=149 BUSY_TIEM=2871, SkipGroup=0, GrpScore=98 | |
| GroupChListUpdate Update group channel list index=3 CenChannel=155 BestCtrlChannel=149 BUSY_TIEM=3457 SkipGroup=0, GrpScore=97 | |
| GroupChListUpdate Update group channel list index=3 CenChannel=155 BestCtrlChannel=149 BUSY_TIEM=3625 SkipGroup=0, GrpScore=97 | |
| GroupChListUpdate Update group channel list index=3 CenChannel=155 BestCtrlChannel=149 BUSY_TIEM=3625 SkipGroup=0, GrpScore=97 | |
| ChIdx=0 control-Channle=36 cen-channel=42 | |
| Max_BUSY_TIME=45 | |
| ChIdx=2 control-Channle=149 cen-channel=155 | |
| Max_BUSY_TIME=3625 | |
| @@@@@@@ final score is (ch36 : 100) | |
| @@@@@@@ final score is (ch40 : 99) | |
| @@@@@@@ final score is (ch44 : 98) | |
| @@@@@@@ final score is (ch48 : 97) | |
| @@@@@@@ final score is (ch52 : 100) | |
| @@@@@@@ final score is (ch56 : 99) | |
| @@@@@@@ final score is (ch60 : 98) | |
| @@@@@@@ final score is (ch64 : 97) | |
| @@@@@@@ final score is (ch149 : 100) | |
| @@@@@@@ final score is (ch153 : 99) | |
| @@@@@@@ final score is (ch157 : 98) | |
| @@@@@@@ final score is (ch161 : 97) | |
| CH0 is non-VHT80 capability! | |
| @@@@@@@ final score is (ch165 : 100) | |
| Min Busy 45 select best ch 36 | |
| mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 | |
| mt76x2_single_sku::sku_base_pwr = 0x1c, DefaultTargetPwr = 0x21, ch_pwr_adj = 0xfffffffb(-5), 0x13B4: 0x1b0f043b | |
| APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) | |
| mt76x2_calibration(channel = 42) | |
| The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8 | |
| Main bssid = d8:0d:17:bb:20:5b | |
| mt76x2_reinit_agc_gain:original agc_vga0 = 0x48, agc_vga1 = 0x48 | |
| mt76x2_reinit_agc_gain:updated agc_vga0 = 0x48, agc_vga1 = 0x48 | |
| mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x33, hi_lna1 = 0x33 | |
| mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x33, hi_lna1 = 0x33 | |
| original vga value(chain0) = 48 | |
| original vga value(chain1) = 48 | |
| <==== rt28xx_init, Status=0 | |
| get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai | |
| get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai | |
| get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai | |
| get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=apclii | |
| RTMPDrvOpen(1):Check if PDMA is idle! | |
| RTMPDrvOpen(2):Check if PDMA is idle! | |
| jiffies=ffff9fff, POLLING_MODE_DETECT_INTV=300 | |
| device rai0 entered promiscuous mode | |
| br0: port 10(rai0) entering forwarding state | |
| br0: port 10(rai0) entering forwarding state | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Address already in use | |
| igmpd#device apclii0 entered promiscuous mode | |
| Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Address alreadydevice rai1 entered promiscuous mode | |
| in use | |
| igmpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 90; errdevice rai2 entered promiscuous mode | |
| or = Address already in use | |
| igmpd# Err: setsockopt - MRT_ADD_VIF | |
| igmpd# file: src/igmp_ifinfodevice rai3 entered promiscuous mode | |
| .c;line: 123; error = Address already in use | |
| igmpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 123; error = Address already in use | |
| igmpd# Err: setsockopt - MCAST_JOIN_GROUP | |
| igmpd# file: src/igmp_ifinfo.c;line: 90; error = Address already in use | |
| igmpd# Err: setsockopt - MRT_ADD_VIF | |
| wlNetlinkTool is already there. | |
| sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 438 | |
| sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 438 | |
| sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 438 | |
| sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 438 | |
| sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 438 | |
| sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 438 | |
| sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 438 | |
| sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 438 | |
| sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 438 | |
| sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 438 | |
| sendto /var/tmp/8 msg 2030 error No such file or directory ,pid 438 | |
| sendto /var/tmp/9 msg 2004 error No such file or directory ,pid 438 | |
| killall: dnsmasq: no process killed | |
| open lock file error! | |
| open lock file error! | |
| qos_wrr_info: 0 0 0 0 0 | |
| QDMA QoS: HW SP | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| [ rsl_initLanHostCfgObj ] 765: error alloc client account share memory | |
| radvd starting | |
| usage: dhcp6s [-c configfile] [-dDf] [-k ctlkeyfile] [-p ctlport] [-P pidfile] intface | |
| radvd starting | |
| [Jan 01 08:00:59] radvd: syntax error in /var/tmp/dconf/radvd_.conf, line 2: { | |
| [Jan 01 08:00:59] radvd: error parsing or activating the config file: /var/tmp/dconf/radvd_.conf | |
| ifconfig: up: error fetching interface information: Device not found | |
| ifconfig: up: error fetching interface information: Device not found | |
| device nas10 entered promiscuous mode | |
| ==>Error, socket or ioctl error for mulifctl | |
| ==>Error, socket or ioctl error for mulifctl | |
| ==>Error, socket or ioctl error for mulifctl | |
| ==>Error, socket or ioctl error for mulifctl | |
| ==>Error, socket or ioctl error for mulifctl | |
| ==>Error, socket or ioctl error for mulifctl | |
| ==>Error, socket or ioctl error for mulifctl | |
| [ getPidFromPidFile ] 112: Cann't open file: /var/run/zebra.pid. | |
| [ getPidFromPidFile ] 112: Cann't open file: /var/run/ripd.pid. | |
| [ read_dhcpc_config ] 113: error, unable to open config file: /var/tmp/dconf/udhcpc.conf | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| nf_conntrack_rtsp v0.6.21 loading | |
| nf_nat_rtsp v0.6.21 loading | |
| ip6tables: Bad rule (does a matching rule exist in that chain?). | |
| ip6tables: Bad rule (does a matching rule exist in that chain?). | |
| ip6tables: Bad rule (does a matching rule exist in that chain?). | |
| [ rsl_setStorageServiceObj ] 1252: mountFlag is 3,We start usb server | |
| killall: ushare: no process killed | |
| pid 1468's current affinity mask: 4 | |
| pid 1468's new affinity mask: 4 | |
| cat: can't open '/dev/voip': No such device or address | |
| pid 435's current affinity mask: 4 | |
| pid 435's new affinity mask: 4 | |
| [EVA ERROR]dspConfigToneMtk(2114)- EXIT toneId=0 | |
| sendto /var/tmp/25 msg 2000 error Resource temporarily unavailable ,pid 1468 | |
| auto_level_control_set <cid:0> <enable:1> <up shift gain:6> <down shift gain:6> <reference Gain:25> <threshold:45> <Noise threshold:40> <Delta threshold:3> | |
| auto_level_control_set <cid:1> <enable:1> <up shift gain:6> <down shift gain:6> <reference Gain:25> <threshold:45> <Noise threshold:40> <Delta threshold:3> | |
| uShare (version 1.1a), a lightweight UPnP A/V and DLNA Media Server. | |
| Benjamin Zores (C) 2005-2007, for GeeXboX Team. | |
| See http://ushare.geexbox.org/ for updates. | |
| usbcore: registered new interface driver usblp | |
| [ rsl_initXTtConfSmtpObj ] 1929: SMTP Server 0.0.0.0 error. | |
| /bin/sh: can't create /proc/tplink/local_domain_name: nonexistent directory | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| #file: src/http_init.c;line: 941; error = No such file or directory | |
| #msg: Invalid msg type! | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables v1.4.17: Couldn't find target `REJECT_WITH_CHAIN' | |
| Try `iptables -h' or 'iptables --help' for more information. | |
| iptables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| Sorry, rule does not exist. | |
| Enable forward! | |
| starting pid 442, tty '': '/sbin/getty -L ttyS0 115200 vt100' | |
| Archer C5v login: root | |
| Password: | |
| Login incorrect | |
| Archer C5v login: admin | |
| Password: | |
| Login incorrect | |
| Archer C5v login: administrator | |
| Password: | |
| Login incorr | |
| process '/sbin/getty -L ttyS0 115200 vt100' (pid 442) exited. Scheduling for restart. | |
| Please press Enter to activate this console. usb 1-2: new high speed USB device number 2 using xhc_mtk | |
| scsi0 : usb-storage 1-2:1.0 | |
| hotplug_storage.c#hotplug_3g(1429): pid 1783: pPlugDevId[0]=19d2_1225_1234567890ABCDEF, plugDevClass[0]=unswitched_3g, plugAction[0]=add | |
| hotplug_storage.c#hotplugLedCtrl(268): -------------ledNum(2), status(2)----------- | |
| hotplug_storage.c#hotplug_3g(1505): handle_card -a called. | |
| scsi 0:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 | |
| scsi 0:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 | |
| sd 0:0:0:1: [sda] call sd_media_changed(), set sdkp->media_present to 1 | |
| sd 0:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 0:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 0:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 0:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| opt=0, manual=0, vendor=0x19d2, proid=0x1225, cmd is | |
| [ usb3gHandleEventHandler ] 4284: *******MODEM_HANDLING********** | |
| prep_switch 342: dir----"." | |
| prep_switch 342: dir----".." | |
| prep_switch 342: dir----"002" | |
| prep_switch 357: find device bus dir----/proc/bus/usb/002/ | |
| prep_switch 368: dir----"." | |
| prep_switch 368: dir----".." | |
| prep_switch 368: dir----"001" | |
| prep_switch 342: dir----"001" | |
| prep_switch 357: find device bus dir----/proc/bus/usb/001/ | |
| prep_switch 3Erase from 0xfe0000 with 0x2b71 bytes, mtd->erasesize 0x10000 | |
| erase addr=fe0000 size=1000068: dir----"." | |
| prep_switch 368: dir----".." | |
| prep_switch 368: dir----"002" | |
| prep_switch 388: find device file index = 0, name = /proc/bus/usb/001/002 | |
| prep_switch 368: dir----"001" | |
| prep_switch 342: dir----"devices" | |
| prep_switch 405: reset device----index = 0, name = /proc/bus/usb/001/002 | |
| Resetting USB device /proc/bus/usb/001/002 | |
| . | |
| Write to flash:0xfe0000, len is 0x2b71 | |
| posix_timer_do: 107 callbacks suppressed | |
| usb 1-2: reset high speed USB device number 2 using xhc_mtk | |
| xhc_mtk xhc_mtk: xHCI xhci_drop_endpoint called with disabled ep 8411b32c | |
| xhc_mtk xhc_mtk: xHCI xhci_drop_endpoint called with disabled ep 8411b300 | |
| Reset successful | |
| sd 0:0:0:1: [sda] call sd_media_changed(), set sdkp->media_present to 1 | |
| sd 0:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 0:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| card_add 192 | |
| Start get card info, vid=19d2, pid=1225 | |
| get_card_info 90 dev->descriptor.idVendor = 0x19d2, dev->descriptor.idProduct = 0x1225 | |
| get_card_info 114 dev->descriptor.bNumConfigurations = 1 | |
| get_card_info 149 usbCinfo[0].idVendor = 0x19d2, usbCinfo[0].idProduct = 0x1225 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 109 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 1sd 0:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| 09 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 214 index = 1 | |
| get_card_info 274 cinfo->idVendor = 0x19d2, cinfo->idProduct = 0x1225 | |
| get_cinfo_ata, 375: OK, the device still has the same vid and pid. | |
| sd 0:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| print_cinfo 62 pro=1225, vendor=19d2, index=-1 | |
| Interface 0, type is 8 | |
| print_cinfo 62 pro=1225, vendor=19d2, index=-1 | |
| Interface 0, type is 8 | |
| can't switch usb device | |
| sd 0:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 0:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| getConfigFromMergeFile 150 decrypt mode_switch.conf successfully | |
| getConfigFromMergeFile 162 pid = 0x1225, vid = 0x19d2 | |
| search start keyword :[start_19d2_1225 | |
| search end keyword :[end_19d2_1225 | |
| save cfg file @/var/3G/19d2_1225_0 | |
| save cfg file @/var/3G/19d2_1225_1 | |
| total =2 | |
| 345 cfgFilePath = /var/3G/19d2_1225_0 | |
| modeSwitchByCfgFile 541 cmd = usb_modeswitch -v 0x19d2 -p 0x1225 -I -W -c /var/3G/19d2_1225_0 & | |
| Start find usb_modeswitch | |
| Reading config file: /var/3G/19d2_1225_0 | |
| * usb_modeswitch: handle USB devices with multiple modes | |
| * Version 1.2.3 (C) Josua Dietze 2012 | |
| * Based on libusb0 (0.1.12 and above) | |
| ! PLEASE REPORT NEW CONFIGURATIONS ! | |
| DefaultVendor= 0x19d2 | |
| DefaultProduct= 0x1225 | |
| TargetVendor= not set | |
| TargetProduct= not set | |
| TargetClass= not set | |
| TargetProductList="" | |
| DetachStorageOnly=0 | |
| HuaweiMode=0 | |
| SierraMode=0 | |
| SonyMode=0 | |
| QisdaMode=0 | |
| GCTMode=0 | |
| KobilMode=0 | |
| SequansMode=0 | |
| MobileActionMode=0 | |
| CiscoMode=0 | |
| MessageEndpoint= not set | |
| MessageContent="5553424312345678000000000000061e000000000000000000000000000000" | |
| MessageContent2="5553424312345679000000000000061b000000020000000000000000000000" | |
| MessageContent3="55534243123456702000000080000c85010101180101010101000000000000" | |
| NeedResponse=1 | |
| ResponseEndpoint= not set | |
| InquireDevice disabled | |
| Success check enabled, max. wait time 20 seconds | |
| System integration mode disabled | |
| Note: target parameter missing; success check limited | |
| Looking for default devices ... | |
| searching devices, found USB ID 19d2:1225 | |
| found matching vendor ID | |
| found matching product ID | |
| adding device | |
| searching devices, found USB ID 1d6b:0002 | |
| searching devices, found USB ID 1d6b:0003 | |
| Found device in default mode, class or configuration (1) | |
| Accessing device 002 on bus 001 ... | |
| Getting the current device configuration ... | |
| OK, got current device configuration (1) | |
| Using first interface: 0x00 | |
| Using endpoints 0x01 (out) and 0x81 (in) | |
| USB description data (for identification) | |
| ------------------------- | |
| Manufacturer: ZTE,Incorporated | |
| Product: ZTE Mobile Broadband | |
| Serial No.: 1234567890ABCDEF | |
| ------------------------- | |
| Looking for active driver ... | |
| OK, driver found; name unknown, limitation of libusb1 | |
| usb 1-2: USB disconnect, device number 2 | |
| sd 0:0:0:1: [sda] call sd_media_changed(), set sdkp->media_present to 1 | |
| sd 0:0:0:1: [sda] Attached SCSI removable disk | |
| OK, driver "unkown" detached | |
| Setting up communication with interface 0 | |
| Could not claim interface (error -6). Skipping message sending | |
| Checking for mode switch (max. 20 times, once per second) ... | |
| usb 1-2: new high speed USB device number 3 using xhc_mtk | |
| Starscsi1 : usb-storage 1-2:1.2 | |
| t find usb_modeswitch | |
| kill 1823Start get card info, vid=19d2, pid=1225 | |
| get_card_info 90 dev->descriptor.idVendor = 0x19d2, dev->descriptor.idProduct = 0x1405 | |
| Couldn't open device, some information will be missing | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 109 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 109 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| scsi 1:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 | |
| In switch judgemenscsi 1:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 | |
| t, get card info error, maybe usb_modeswitch. | |
| hotplug_storage.c#hotplugLedCtrl(268): -------------ledNum(2), status(1)----------- | |
| [ usb3gHandleEventHandler ] 4258: *******MODEM_UNLINK********** | |
| Erase from 0xfe0000 with 0x2b5a bytes, mtd->erasesize 0x10000 | |
| erase addr=fe0000 size=10000 | |
| sd 1:0:0:1: [sda] call sd_media_changed(), set sdkp->media_present to 1 | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| . | |
| Write to flash:0xfe0000, len is 0x2b5a | |
| . | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| hotplug_storage.c#hotplug_3g(1429): pid 1784: pPlugDevId[0]=19d2_1225_1234567890ABCDEF, plugDevClass[0]=unswitched_3g, plugAction[0]=remove | |
| hotplug_storage.c#hotplug_3g(1429): pid 1784: pPlugDevId[1]=19d2_1405_1234567890ABCDEF, plugDevClass[1]=switched_3g, plugAction[1]=add | |
| hotplug_storage.c#hotplugLedCtrl(268): -------------ledNum(2), status(2)----------- | |
| hotplug_storage.c#hotplug_3g(1505): handle_card -a called. | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| opt=0, manual=0, vendor=0x19d2, proid=0x1405, cmd is | |
| [ usb3gHandleEventHandler ] 4284: *******MODEM_HANDLING********** | |
| prep_switch 342: dir----"." | |
| prep_switch 342: dir----".." | |
| prep_switch 342: dir----"002" | |
| prep_switch 357: find device bus dir----/proc/bus/usb/002/ | |
| prep_switch 368: dir----"." | |
| prep_switch 368: dir----".." | |
| prep_switch 368: dir----"001" | |
| prep_switch 342: dir----"001" | |
| prep_switch 357: find device bus dir----/proc/bus/usb/001/ | |
| prep_switch 368: dir----"." | |
| prep_switch 368: dir----".." | |
| preErase from 0xfe0000 with 0x2b5a bytes, mtd->erasesize 0x10000 | |
| erase addr=fe0000 size=10000p_switch 368: dir----"003" | |
| prep_switch 388: find device file index = 0, name = /proc/bus/usb/001/003 | |
| prep_switch 368: dir----"001" | |
| prep_switch 342: dir----"devices" | |
| prep_switch 405: reset device----index = 0, name = /proc/bus/usb/001/003 | |
| Resetting USB device /proc/bus/usb/001/003 | |
| . | |
| Write to flash:0xfe0000, len is 0x2b5a | |
| posix_timer_do: 27 callbacks suppressed | |
| . | |
| usb 1-2: reset high speed USB device number 3 using xhc_mtk | |
| xhc_mtk xhc_mtk: xHCI xhci_drop_endpoint called with disabled ep 8342012c | |
| xhc_mtk xhc_mtk: xHCI xhci_drop_endpoint called with disabled ep 83420200 | |
| xhc_mtk xhc_mtk: xHCI xhci_drop_endpoint called with disabled ep 83420100 | |
| Reset successfulsd 1:0:0:1: [sda] call sd_media_changed(), set sdkp->media_present to 1 | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| card_add 192 | |
| Start get card info, vid=19d2, pid=1405 | |
| get_card_info 90 dev->descriptor.idVendor = 0x19d2, dev->descriptor.idProduct = 0x1405 | |
| get_card_info 114 dev->descriptor.bNumConfigurations = 1 | |
| get_card_info 149 usbCinfo[0].idVendor = 0x19d2, usbCinfo[0].idProduct = 0x1405 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 109 ZQQ devsd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| ->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 109 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 214 index = 1 | |
| get_card_info 274 cinfo->idVendor = 0x19d2, cinfo->idProduct = 0x1405 | |
| get_cinfo_ata, 375: OK, the device still has the same vid and pid. | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| print_cinfo 62 pro=1405, vendor=19d2, index=0 | |
| Interface 0, type is 2 | |
| Interface 1, type is 10 | |
| Interface 2, type is 8 | |
| print_cinfo 62 pro=1405, vendor=19d2, index=0 | |
| Interface 0, type is 2 | |
| Interface 1, type is 10 | |
| Interface 2, type is 8 | |
| card_add 247: goto already_switched | |
| card_add 468 already_switched | |
| Start get card info, vid=19d2, pid=1405 | |
| get_cardsd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| _info 90 dev->descriptor.idVendor = 0x19d2, dev->descriptor.idProduct = 0x1405 | |
| get_card_info 114 dev->descriptor.bNumConfigurations = 1 | |
| get_card_info 149 usbCinfo[0].idVendor = 0x19d2, usbCinfo[0].idProduct = 0x1405 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 109 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 109 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 214 index = 1 | |
| get_card_info 274 cinfo->idVendor = 0x19d2, cinfo->idProduct = 0x1405 | |
| get_cinfo_ata, 375: OK, the device still has the same vid and pid. | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| Start get card info, vid=19d2, pid=1405 | |
| get_card_info 90 dev->descriptor.idVendor = 0x19d2, dev->descriptor.idProduct = 0x1405 | |
| get_card_info 114 dev->descriptor.bNumConfigurations = 1 | |
| get_card_info 149 usbCinfo[0].idVendor = 0x19d2, usbCinfo[0].idProduct = 0x1405 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 109 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 109 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 214 index = 1 | |
| get_card_info 274 cinfo->idVendor = 0x19d2, cinfo->idProductsd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| = 0x1405 | |
| get_cinfo_ata, 375: OK, the device still has the same vid and pid. | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] Attached SCSI removable disk | |
| [ processAddUsbStorMsg ] 332: phyMediumObj.name same as pUsbStorMsg->name | |
| usbcore: registered new interface driver cdc_ether | |
| usbcore: registered new interface driver rndis_host | |
| Failed to to open /proc/tty/driver/usbserial | |
| Start get card info, vid=19d2, pid=1405 | |
| get_card_info 90 dev->descriptor.idVendor = 0x19d2, dev->descriptor.idProduct = 0x1405 | |
| get_card_info 114 dev->descriptor.bNumConfigurations = 1 | |
| get_card_info 149 usbCinfo[0].idVendor = 0x19d2, usbCinfo[0].idProduct = 0x1405 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 109 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 109 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 214 index = 1 | |
| get_card_info 274 cinfo->idVendor = 0x19d2, cinfo->idProduct = 0x1405 | |
| get_cinfo_ata, 375: OK, the device still has the same vid and pid. | |
| Start get card info, vid=19d2, pid=1405 | |
| get_card_info 90 dev->descriptor.idVendor = 0x19d2, dev->descriptor.idProduct = 0x1405 | |
| get_card_info 114 dev->descriptor.bNumConfigurations = 1 | |
| get_card_info 149 usbCinfo[0].idVendor = 0x19d2, usbCinfo[0].idProduct = 0x1405 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 109 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x2 | |
| get_card_info 90 dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 109 ZQQ dev->descriptor.idVendor = 0x1d6b, dev->descriptor.idProduct = 0x3 | |
| get_card_info 214 index = 1 | |
| get_card_info 274 cinfo->idVendor = 0x19d2, cinfo->idProduct = 0x1405 | |
| get_cinfo_ata, 375: OK, the device still has the same vid and pid. | |
| [ usb3gHandleEventHandler ] 4291: *******MODEM_LINK***deviceName: ttyNotReady, modemName: 3G Modem, ifNumber: 0********** | |
| [ usb3gHandleEventHandler ] 4294: *******lteDeviceName: ETHER_MODEM**************** | |
| hotplug_storage.c#hotplugLedCtrl(268): -------------ledNum(2), status(1)----------- | |
| hotplug_storage.c#hotplug_3g(1623): handle_card successfully, updateAttachedDevsFile. | |
| Erase from 0xfe0000 with 0x2b71 bytes, mtd->erasesize 0x10000 | |
| erase addr=fe0000 size=10000 | |
| posix_timer_do: 9 callbacks suppressed | |
| . | |
| Write to flash:0xfe0000, len is 0x2b71 | |
| [ getPidFromPidFile ] 112: Cann't open file: /var/run/ripd.pid. | |
| [ oal_lte_initDhcp ] 141: The LTE device name is ETHER_MODEM . | |
| get error CMSG_TYPE! | |
| ====usbp umount===argc 2 | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| ====usbp mount===argc 2 | |
| iptables: No chain/target/match by that name. | |
| ip6tables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| iptables: No chain/target/match by that name. | |
| iptables: Bad rule (does a matching rule exist in that chain?). | |
| get error CMSG_TYPE! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| [ processKerRouteMsg ] 241: L3ForwardingEntry is Exist | |
| [ processKerRouteMsg ] 241: L3ForwardingEntry is Exist | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| pid 2035's current affinity mask: 4 | |
| pid 2035's new affinity mask: 8 | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| iptables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| iptables: No chain/target/match by that name. | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| ====usbp====return 0@1600888783 | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] media is not present, wait for 0.5 seconds | |
| sd 1:0:0:1: [sda] we have tried 10 times, but the USB device is still not ready, just return here! | |
| ====usbp====return 0@1600888866 | |
| hotplug_storage.c#hotplugLedCtrl(268): -------------ledNum(2), status(1)----------- |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment